Choose the source
The leader is the account where the original order begins. Use the account whose platform, rules, and order workflow you understand best.
REPLIKANTO FOR NINJATRADER 8
One decision.Every permitted account.
Place the trade once in your leader account. Replikanto sends it to the follower accounts you arm, using the quantity method you choose. You still own the decision, the rules, and every live position.
For NinjaTrader Desktop 8.1.7 or later. Trade copying is allowed only where each broker or prop firm permits it. Confirm the policy for every account type before use.
ONE LEADER · CONTROLLED FOLLOWERS
Trade the leader.
Govern the followers.
Replikanto watches one leader account and replicates eligible orders to the follower accounts enabled in that tab. Start on one machine with every account visible inside the same NinjaTrader instance. Add network or remote machines only when the simple setup is proven.
Arm followers
Select only accounts that permit copying, match the instrument, and can accept the chosen size. An unchecked account receives nothing.
Watch every result
Confirm orders, fills, cancellations, and positions on every account. A copier reduces clicks; it does not remove execution risk.
Copying identical trades multiplies identical exposure.
Five accounts are not diversification when all five hold the same position. A rejected order, partial fill, connection loss, or rule mismatch can also leave one follower different from the leader.
INSTALL · CONNECT · ARM
Build it once.
Verify every link.
These steps follow the current FlowBots and NinjaTrader workflow. Keep every account flat and begin in simulation wherever the provider makes simulation available.
Confirm the account rules first
Ask each firm whether your exact evaluation, simulated-funded, or live account may use Replikanto and whether a special compliance edition is required. Save the written answer.
- Never copy between accounts owned by different people.
- Never hedge opposite directions across accounts to evade a rule.
- Match the firm's permitted account count, contract size, news, automation, and monitoring rules.
Buy and download Replikanto
Open FlowBots through the First Light Beacon partner button, choose the license that fits the number of machines, and enter BREAKOUTHUNTER20 at checkout. Download the Replikanto ZIP from the FlowBots delivery or account area.
Do not unzip the NinjaScript package.
NinjaTrader imports the supplied ZIP. Each machine involved needs a valid Replikanto license; internet-based Remote Mode also uses FlowBots remote credits on the leader side.
Import the FlowBots add-on
Start NinjaTrader Desktop. From Control Center, import the ZIP exactly as supplied by FlowBots, accept the import confirmations, and restart NinjaTrader when the import finishes.
TOOLS→IMPORT→NINJASCRIPT ADD-ON→SELECT REPLIKANTO ZIP
Updating an existing installation?
Follow the current FlowBots update article and accept the replacement prompt. Do not run two different Replikanto versions in the same NinjaTrader installation.
Connect every account in NinjaTrader
Connect each approved broker or prop-firm login. Every local leader and follower must appear in NinjaTrader's Accounts view before it can appear in Replikanto.
- If only one connection appears, confirm whether NinjaTrader Multi-provider mode is required.
- Rithmic and CQG can restrict simultaneous credentials. Ask the provider about account consolidation instead of repeatedly reconnecting.
- Confirm every account is flat before selecting it.
Open Replikanto
Open the installed add-on from NinjaTrader Control Center. Create one tab for the instrument and leader you are configuring.
NEW→FLOWBOTS→REPLIKANTO
- Select the correct leader account.
- Select the exact active futures contract.
- For a first setup, use Exact Quantity and one simulation follower.
Add followers one at a time
Enable one approved follower, confirm its quantity setting, and test it before adding the next. Keep every follower in the same direction unless a firm's current written rules explicitly say otherwise.
Do not use a production account as the first test.
A copied order can transmit immediately. Use simulation and a non-marketable limit order, then inspect the NinjaTrader Orders and Accounts views.
Save the workspace
After the complete test passes, save the active NinjaTrader workspace from the Workspaces menu. Closing a Replikanto window with its X does not reliably save the configuration.
WORKSPACES→ACTIVE WORKSPACE→SAVE
- Check for another Replikanto tab or workspace using the same instrument.
- Duplicate copier windows can duplicate or triple follower orders.
- Recheck leader, instrument, followers, and quantity after every rollover or account change.
THE NON-MARKETABLE LIMIT TEST
Do not trust the setup.
Make it prove itself.
Run this test while the selected accounts are flat. Use simulation accounts where available and place the order far enough from market that it should not fill.
Check the starting state
Leader and every enabled follower show flat, zero working orders, the same contract month, and the expected connection.
Place one distant limit
Submit a quantity-one limit order on the leader. Do not use a price likely to trade while you inspect the copies.
Count every follower order
In NinjaTrader's Orders view, verify exactly one corresponding order appears on each armed follower and nowhere else.
Cancel from the leader
Cancel the test order. Confirm every follower order cancels and no account retains a working order.
Repeat after changes
Retest after contract rollover, connection changes, account additions, software updates, workspace changes, or moving machines.
Keep an independent exit
Know how to view and flatten every account through its broker or firm interface if NinjaTrader, Replikanto, the VPS, or internet fails.
Global Simulation Mode can remove live followers from the list.
If it was enabled, turn it off from Tools → Global Simulation Mode, reopen Replikanto, select the followers again, and repeat the full test before use.
BUILD THE ACCOUNT STACK
Use the copier
where the rules allow it.
Firm permission is part of the setup. Policies can differ by program and can change after you buy, so treat this as a dated starting point and confirm your exact accounts in writing.
Tradeify
Up to five simulated-funded accounts. Tradeify permits copying across accounts you own and manage when all trades remain in the same direction.
Open TradeifyLucid Trading
Up to five funded accounts. Lucid permits copiers and automation across your own accounts while prohibiting hedging.
Open LucidElite Trader Funding
Use only a copier and edition on ETF's approved list. Its current list names the Replikanto FlowBots PropFirm Compliance Edition.
Open Elite Trader FundingBluSky
BluSky permits same-direction copying among accounts you own, subject to its current plan and funded-account limits.
Open BluSkyPurdia Capital
Purdia permits supervised copying and semi-automation across its account limit, but prohibits unattended fully automated trading.
Open PurdiaEarn2Trade
Use Earn2Trade only as the manually traded leader/source, never as a follower. Because Earn2Trade's published policy says trade copiers are not allowed on its programs, obtain written approval before letting Replikanto read that leader and copy outward.
Open Earn2TradeLegends Trading is not labeled copy-ready here.
A current official copier policy was not confirmed. Get written permission before using any Legends account as a leader or follower.
Need the account comparison first?
Compare current starting prices, activation and funded fees, account limits, platforms, and copying policies.
MATCH SIZE WITH INTENT
Choose the copy method.
Start with the simplest.
Replikanto provides several quantity and routing methods. Exact Quantity is the clearest first configuration; move to proportional methods only after you understand how they calculate each follower order.
Exact Quantity
Copies the leader's contract quantity to every enabled follower. One on the leader means one on each follower.
Ratio
Multiplies the leader quantity by the value set for each follower. Validate rounding and firm contract limits before use.
Pre Allocation
Uses the quantity allocated to each follower rather than the leader's submitted quantity.
Capital methods
Equal/Pooled, Net Liquidation, Available Money, and Percentage Change can size from account values. Review FlowBots documentation before enabling them.
ATM Copy
Can use the leader's NinjaTrader ATM strategy on followers to manage exits. ATM names and local/remote behavior need their own test.
Cross Order
Can map supported mini and micro contracts, such as ES and MES. Confirm the exact pair, ratio, and contract month.
Replikanto also offers Market Only, Follower Guard, Network Mode, and Remote Mode.
Those features solve specific workflows; they also add configuration choices. Read the current FlowBots instructions and test each feature independently before combining them.
ONE MACHINE FIRST
Keep the first build local.
Add distance later.
The fewest moving pieces give you the cleanest test. Put the leader and followers in one NinjaTrader instance when the connections permit it.
Best first deployment
Every account is connected to the same NinjaTrader installation and appears directly in one Replikanto window. No network node or remote credit is involved.
When accounts need separation
Every machine must run NinjaTrader and hold its own valid Replikanto license. Internet Remote Mode requires credits on the leader; same-LAN Network Mode does not use internet remote credits.
A second machine is a second failure path.
Sleep, Windows updates, internet loss, expired licenses, contract mismatch, and stale workspaces can separate followers from the leader. Keep machines awake, monitored, and independently reachable.
Affiliate disclosure
The Replikanto link and some prop-firm links on this page are affiliate links. Breakout Hunter LLC / First Light Beacon may receive a commission when you visit or purchase through them, at no additional cost to you. The 20% Replikanto code is supplied through the FlowBots affiliate program; FlowBots controls eligibility and checkout acceptance.
Replikanto and FlowBots are independent third-party products and companies. First Light Beacon does not control their software, licensing, pricing, order routing, availability, support, or results. Product details and firm policies were checked August 7, 2026; verify the current documentation before purchase or live use.
Official FlowBots references: Replikanto product · install and update · copy troubleshooting · Remote Mode.